♦DIY QUAD FLYER KIT SUITABLE FOR BEGINNERS TO ADVANCED PILOTS.
♦WELL DESIGNED CNC CUT FRP FRAME STRUCTURE, WHICH RESULTS IN A HIGH RIGIDITY BODY
WITH CRUMBLE ZONE TO PROTECT THE ELECTRONIC DEVICES AGAINST MINOR CRASH IMPACT.
♦EASE OF ASSEMBLY / WIRING / SETTING.
♦KIT COMES WITH CANOPY TO PROVIDE A CLEAN LOOK AND REDUCE THE WIND DRAG.
♦IN-EXPENSIVE SPARE PARTS AND MORE OPTIONAL UPGRADES AVAILABLE.
♦ADVANCED ELECTRONIC AUXILIARIES AVAILABLE.
500X Quad Basic Kit x 1 set
♦ CROSSING DISTANCE: MOTOR SHAFT TO MOTOR SHAFT 500X (500mm).
♦ PROPELLER SIZE: 500X (10 INCH).
♦ MOTOR: 800~960kV BRUSHLESS MOTOR
♦ ESC: 10A~18A ESC (OPTION)
♦ STABILIZER SYSTEM: FLIGHT CONTROLLERS (OPTIONS, NOT INCLUDED IN THIS PACKAGE).
♦ CARRYING BAG (OPTION, NOT INCLUDED IN THIS PACKAGE).
♦ PROTECTION FRAME (OPTION, NOT INCLUDED IN THIS PACKAGE).
♦ WEIGHT: 580~650g
(WITH RECOMMENDED STANDARD POWER PACKAGE, WITHOUT BATTERY).
♦ MAXIMUM FLYING WEIGHT: 500X (2000g)
(DEPENDS ON POWER PACKAGE, INCLUDING BATTERY & PAYLOAD).
♦ BATTERY: 7.4v TO 11.1V (2S TO 3S LiPo).
♦ FLYING DURATION: 7~20 MINUTES(DEDENDS ON BATTERY CAPACITY, PAYLOAD AND FLYING STYLE).
Note: The propllers after installation is not totally horizontal, this is normal, the deviation / tilt is about 6 degrees (see drawing).
You may also need…
Required for operation:
MOTOR: 800~960kV x 4pcs
ESC: 10~18A ESC x 4pcs
BATTERY: 7.4v TO 11.1V (2S TO 3S LiPo)
STABILIZER SYSTEM: FLIGHT CONTROLLERS x 1pc
Propeller: 10 × 4.5in x 4pcs
Transmitter(7-channel or more)
Receiver(7-channel or more)
The payload above includes the weight of battery, the weight of 500X itself is about 670g.
CAUTION : The Power Consumption Table is calculated based on cruising, the ESC output current may increase 3 or 4 times more for flying mode other than cruising due to increased power output. Make sure to check flying time carefully, OVER discharging of battery during flight may damage your battery and cause flight control failure of the Quad Flyer.